Flexible Verlängerungsrohr-Fertigungsstraße aus Kunststoff
Basisinformation
Modell: SJ0432
Produktbeschreibung
No. | Item | Unit | Technical Parameter |
1 | Model |
| SJ45/28 |
2 | Material of screw barrel |
| Bimetallic materials, nitriding treatment, force feeding area is adopt water cooling |
3 | Material of screw |
| 38CrMoAlA Bimetallic materials, nitriding treatment |
4 | Diameter of screw | mm | 45mm |
5 | L/D ratio |
| 28:1 |
6 | Depth of screw nitriding treatment | mm | 0.4-0.6mm |
7 | Rigidity of nitriding |
| HV>740 |
8 | Depth of screw barrel nitriding treatment |
| HV>940 |
9 | Screw barrel heating area |
| 4sections |
10 | Heating method |
| Casting aluminum heating ring |
11 | Heating power | kw | 4kw*4section |
12 | Screw barrel cooling area |
| 4sections |
13 | Blower power | kw | 0.06kw*4sections |
14 | Output capacity | Kg/h | 40kg/h |
15 | Gear box |
| Adopt ZLYJ-173 rigid tooth surface gear box, specialize for extruder |
16 | Speed control system |
| Frequency conversion |
17 | Main motor | KW | 5.5 |
No. | Item | Unit | Technical Parameter |
1 | Material of mould |
| 40Cr treatment |
2 | Mould head heating method |
| Stainless steel heating ring, heating for one section |
3 | Pairs of module |
| 42pairs |
4 | Girth of the module | mm | 50*56.55 |
5 | Suitable pipe range | mm | Φ16,20,25,32mm (corrugated pipe) |
No. | Item | Unit | Technical Parameter |
1 | Quantity of moulding board | pcs | One pcs, with water cooling |
2 | Material of moulding board |
| Cast iron, processing |
3 | Driving method |
| Gear wheel driving |
4 | Gear box |
| Worm wheel,worm gear box (two sets) |
5 | Hauling speed | m/min | Max speed : 1-15m/min |
6 | Driving motor power | kw | 2.2kw, frequency conversion |
No. | Item | Unit | Technical Parameter |
1 | Mode |
| Double stations |
2 | Dimension of winding disk |
| Inner:200-500 * outside:700* width:300-500mm The speed: 1-15m/min Air pressure: 0.5mpa |
Produktgruppe : Erweiterung-Rohr-Maschine
Premium Related Products
